BuddyHatton find "

bottom plate bent nail anchor

" about 29 results

CURRIES Frame and Anchor Installations - APVA

a. Assemble frame. b. Install snap-in anchors to align with pierced holes in jambs. (Frames may also be supplied with anchors welded in place).


Slab Bolsters, Anchor Bolts, Construction Products, Rebar Tie ...

EMI Construction Products is your source for construction supplies, including concrete forms, concrete accessories, plywood forms, wall ties, aluminum forming supplies and a variety of other construction materials.


Frequently Asked Questions » HIANDRI - Bottom plate packers

NO, there is no load on the plate between the studs so there is no reason for the plate to sag. HIANDRI Packers are made from Polypropylene, it is called the steel of plastics; it is very hard and strong and capable of carrying at least 4 times the load that a stud can carry.


VSL | Bars | post-tensioning bar systems

Bars & post-tensioning bar systems. VSL bar systems provides great versatility in geotechnical and construction applications as they cover a full range from hot-rolled bars with grades of 500MPa and 670MPa through to high-tensile alloy steel stressbars up to 1,050MPa.


Actech International - Official Site

Infrastructure Project. You probably have used one or more Actech products...read more about the way the Gateway Bridge project used our products on this $1.6Billion AUD project


Hardware and Fasteners | PlanItDIY

Mounts at the top and bottom of the door leaving a small wafer of metal exposed. Commonly used on furniture doors or where doors are intended to be inconspicuous.


Rail fastening system - Wikipedia

A rail fastening system is a means of fixing rails to railroad ties (North America) or sleepers (British Isles, Australasia, and Africa).The terms rail anchors, tie plates, chairs and track fasteners are used to refer to parts or all of a rail fastening system.


Slab Bolsters, Anchor Bolts, Construction Products, Rebar Tie ...

sandwich panel erection anchor with shear plate. Full embedment, reinforcement and a minimum compressive strength of 3,300 psi gives the 4 - 5 ton Sandwich Panel Erection Anchor a pullout strength equal to their ultimate mechanical strength if reinforced with 2 ea. #3 Rebar x 2’-6" bent on a 30° angle.


C.R. Laurence Complete Product Index

Three Easy Ways to Navigate Over 70,000 Products: Best: Search by Part Number Better: Browse Alphabetically in our A-to-Z Index Good: Search by Product Name You can also narrow your search by industry by selecting a CRL brand below.


Construction Glossary - Custom Home Building Manual

Free Construction Glossary and Home Building Terms. · General contractor - responsible for the execution, supervision and overall coordination of a project and may also perform some of the individual construction tasks.